Panasonic 524X07801B - Manual (Page 82)

82 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 4. User Maintenance Section 700 - Operation
Set System Speed Dial Numbers
Description
For a description of System Speed Dial (SSD), see “System Speed Dial” on page 181 for a Digital
Key Telephone, “System Speed Dial” on page 240 for a Digital Single Line Telephone (DSLT), and
“System Speed Dial” on page 283 for a Single Line Telephone (SLT).
Operation
To set SSD numbers:
Hardware Requirements
• N/A
Related Programming
• N/A
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT displays
2. At the 81 level, enter 02.
3. Press the HOLD key. 8102-
SSD Assignment displays
4. Press the HOLD key. 0 :
SSD Number displays
5. Press the HOLD key. Enter SSD # displays
6. Enter the SSD bin number (00-79 or 000-799).
7. Press the HOLD key. -SSDXXX XXX displays (where
XXX = SSD bin number)
8. Enter the SSD digits to be dialed.
Note: Press the FLASH key to clear an entry or any exist-
ing data.
9. Press the HOLD key to store the entry. Next SSD bin number displays
10. To set additional SSD numbers, press the volume up or
down key or press the HOLD key to move to the desired
SSD.
Desired SSD bin number displays
11. Repeat steps 8-10 until all SSDs are entered.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
81-
User MAINT displays
OR...
ON/OFF LED goes off