Panasonic 524X07801B - Manual (Page 257)

Section 700 - Operation Chapter 7. SLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98 257
To set Call Forwarding - Busy:
To cancel Call Forwarding - Busy:
Call Forwarding - No Answer
When Call Forwarding - No Answer is set, a call will ring until the Call forward No Answer timer
expires. When the timer expires, the unanswered call is forwarded.
To set Call Forwarding - No Answer:
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the appropriate Set Call Forwarding code:
• For your extension, enter 722.
• For another extension, enter 742.
3. If setting Call Forwarding for another extension, dial the
number of the extension whose calls you want to forward.
4. Enter the destination number:
• If forwarding to another extension, dial the extension
number.
• If forwarding to an outside number, press the # key then
enter the SSD bin number.
Note: Any outside number used for Call Forwarding must
already be programed into speed dialing. (For instructions,
see “Speed Dialing” on page 276.)
5. Replace the handset.
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the appropriate Cancel Call Forwarding code:
• For your extension, enter 732.
• For another extension, enter 752.
3. If canceling Call Forwarding for another extension, dial the
extension number.
4. Replace the handset.
Action Result
1. Lift the handset. Intercom dial tone
2. Enter the appropriate Set Call Forwarding code:
• For your extension, enter 723.
• For another extension, enter 743.