Panasonic 524X07801B - Manual (Page 235)

Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98 235
Note: For details about handling multiple calls, see “Call Hold” on page 214.
Hardware Requirements
• N/A
Related Programming
• FF3: CO Off-Hook Signal.
Considerations
• The CO call type may be either multiple ring, direct, or camp-on.
• The system does not send the offhook signal under the following conditions:
• During a conference call
• During an OHVA or Busy override
• Data Privacy is enabled
• the receiving telephone is a 3rd party voice mail.
Offhook Voice Announce
(All Versions)
Description
You can interrupt a busy extension when making an Intercom Call, and then use the Off-Hook Voice
Announce (OHVA) feature to make an announcement that only the called party can hear. You can also
transfer a held call to a busy extension after making the announcement using this feature.
Operation
To make an OHVA :
To transfer a call using OHVA:
Action Result
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number. Busy signal
3. Enter the OHVA feeature access code (default = 8).
4. Make your announcement
Action Result
1. While on a call, press the HOLD key. Current call on hold
2. Dial the extension number to which the call is being trans-
ferred.
Busy signal
3. Enter OHVA feature access code (default = 8) and announce
the call to be transferred.