Printronix ThermaLine T5000r User Manual
Page 75

Print Speed Limits
75
Use this formula to determine printer speed in relation to bar code
height:
By changing the Min. Code Height, the printer and slew speeds will
be changed automatically.
To change the Min. Code Height:
1.
Press
to take the printer offline and place the printer in
Menu mode.
2.
If necessary, press
↓
and
↵
at the same time to unlock the
↵
key.
3.
If necessary, press
until VALIDATOR displays.
4.
Press
↓
until Min. Code Height displays.
5.
Press + or – to scroll through the choices: 0.13 to 1.00 inches in
0.01 inch increments. The default is 0.30 inches.
6.
Press
↵
to select the desired value. The printing and slew
speeds will be changed after
↵
is pressed.
7.
Press
↓
and
↵
at the same time to lock the
↵
key, then press
PAUSE to take the printer offline.
8.
Press PAUSE again to put the printer online.
To set the printer speed manually:
1.
Press
to take the printer offline and place the printer in
Menu mode.
2.
If necessary, press
↓
and
↵
at the same time to unlock the
↵
key.
3.
Press
until MEDIA CONTROL displays.
4.
Press
↓
until Print Speed displays.
5.
Press + or – to scroll through the choices.
6.
Press
↵
to select the desired value.
7.
Press
↓
and
↵
at the same time to lock the
↵
key, then press
PAUSE to take the printer offline.
8.
Press PAUSE again to put the printer online.
Bar Code Height In Inches
0.030
Maximum Printer Speed In
Inches Per Second
=
..
.
..
.
..
.
..
.