Lexmark 302 - Manual (Page 96)

Adjusting the Top of Form Position
The Micro
↑
and Micro
↓
keys control fine vertical movement. Each
time you press these keys, the printer moves the form in 0.355 mm
(0.014 in.) increments.
Note: If you use the Micro ↑ , Micro ↓ , or Line Feed keys to adjust
the print position, you may need to reprint the page.
Open the access cover. Then open the front paper door as follows:
1. Pull the door up until it will not go any higher.
2. Push the door back slightly to lock it in the open position.
A c c e s s C o v e r
P a p e r D o o r
Next load forms, if necessary (see “Loading Forms in the F2 Forms
Device” on page 1-57 for more information). Complete the following
steps to make fine vertical adjustments to the top of form position.
To set the top of form position, follow these steps:
1. Press Stop.
The printer displays
NOT READY
1-74 User’s Guide Model 302