Lexmark 302 - Manual (Page 118)

11. Compare your printout with the sample printout.
Did the lines print and is the remainder of the printout clear and
readable?
If YES, go to Step 12.
If NO, do the following:
a. If any of the following items are not installed correctly, the
printer can experience forms jamming, ribbon jamming, or an
incorrect printer verification printout:
Forms device
Ribbon cartridge
Forms.
Repeat the Setup Instructions from page 1-6 if you suspect a
ribbon, forms, or forms device installation problem.
b. Press Enter or Start, load another form, and press
Load/Eject to get another printout.
c. If the second printout is still not similar to the sample
printout, go to Appendix B, “Problem Solving.”
d. Once you get a good printout, go to Step 12.
12. Turn the power Off (O).
Power Switch
1-96 User’s Guide Model 302