Lexmark 302 - Manual (Page 68)

Adjusting the Print Alignment
You can adjust dot registration and print quality for characters
created using bidirectional printing. The bidirectional alignment may
need periodic adjustment to maintain print quality.
To change the bidirectional alignment, follow these steps:
1. If the printer is ready, press Stop.
The printer displays
2. Press Test.
The printer displays
3. Press Scroll ↓ or Scroll ↑ until the printer displays
4. Press Enter or Start to print this test.
The Ready indicator goes on and printing begins. The test
prints samples using alignment values higher and lower than the
default value. The print sample using the default value is
indicated with an asterisk (
* ). The alignment printout is
complete when the Ready indicator goes off.
NOT READY
OPERATOR PRINT TESTS
Printer Demonstration
OPERATOR PRINT TESTS
Bidirectional Adjustment
1-46 User’s Guide Model 302