Lexmark 302 - Manual (Page 129)

5. Carefully feed the form under the lower forms guide. Use the
left edge of the lower forms guide to help feed the form in
straight. Feed the form until the top edge touches both the
left
and right feed rollers. Continue to hold the form.
L o w e r
F o r m s G u i d e
The printer displays
6. Press Load/Eject.
As the printer begins to pull in the form, release the form. The
Ready indicator goes on, and printing begins. The test prints
samples using alignment values higher and lower than the
default value. The print sample using the default value is
indicated with an asterisk (
* ). The alignment printout is
complete when the Ready indicator goes off.
4 PRESS LOAD
Chapter 1. Setting Up the 4232 Printer Model 302 1-107