Installing the continuous forms device (f1) – Lexmark 302 User Manual

Page 40

Installing and Using the Continuous Forms Device
(F1)

The following sections describe how to install and use the
Continuous Forms Device (F1).

Note: Make sure that the proper forms device is configured. See
“Preparing for Forms Device Installation” on page 1-10 for the exact
steps.

Installing the Continuous Forms Device (F1)

To install the F1 forms device, follow these steps:

1. Hold the forms device so that the

device number F1 is in the

upper left corner facing you. Note the

bottom metal bar and the

clips; they will be important later.

2. Remove the orange shipping clip, if installed.

Important

The F1 forms device for the 4232 Printer Model 302 has a
circle around the F1 emblem. Use only these forms devices
in the printer.

To p o f F o rm s D e vice

B o t to m M e ta l B a r

C lip s

Te n s io n e r P la t e s

1-18

User’s Guide Model 302