Lexmark 302 User Manual

Page 140

5. Connect the power cord to the printer and to the electrical outlet.

6. Turn the power On (|). All indicators and blocks on the display

light, and the alarm beeps. The printer then displays

and

Note: If the printer does not show the correct display sequence,
go to the status code section of Appendix B, “Problem Solving.”

7. You no longer need to have access to the rear of the printer.

Position the printer so that the front edge aligns with the front
edge of your printer stand or table.

8. Refer to your computer system documentation for information on

attaching the cable to your computer.

DIAGNOSTICS IN PROGRESS