Lexmark 302 User Manual
Page 217
1. Turn the power Off (O).
2. Wait 10 seconds, then turn the power On (|).
3. If the printer displays this status code again, call for service.
1. Install a new ribbon.
2. Turn the power Off (O).
3. Wait 10 seconds, then turn the power On (|).
4. If the printer displays this status code again, call for service.
The printer displays this message only while Darker or Lighter is
held down. These key functions are valid only after the printer is
ready and the automatic forms thickness adjustment (AFTA)
measurement has been made. It is best to use these keys only
when the printer is printing.
A1 MACHINE CHECK
SEE USER'S GUIDE
A2 MACHINE CHECK
SEE USER'S GUIDE
A3 MACHINE CHECK
SEE USER'S GUIDE
A4 MACHINE CHECK
SEE USER'S GUIDE
A9 FUNCTION NOT AVAILABLE
USE DURING PRINTING
Appendix B. Problems
B-17
- E260d (142 pages)
- 6600 Series (173 pages)
- 10N0227 (1 page)
- Z12 (2 pages)
- 301 (144 pages)
- NO. 35 (1 page)
- Z65n (111 pages)
- dn2 (217 pages)
- 10E (144 pages)
- Z2300 (54 pages)
- 230 (213 pages)
- 310 Series (2 pages)
- PRO700 (24 pages)
- C 720 (18 pages)
- C520 (145 pages)
- X656 MFP (104 pages)
- Prospect Pro207 (27 pages)
- 337 (258 pages)
- OptraImage 242 (207 pages)
- T64x (6 pages)
- C524 (146 pages)
- 4098-001 (70 pages)
- 1200 Series (21 pages)
- X650 Series (8 pages)
- 5300 (179 pages)
- 4549 (235 pages)
- 202 (320 pages)
- 4076-0XX (89 pages)
- 10N0016 (1 page)
- 5025 (171 pages)
- 1361760 (1 page)
- C 546dtn (6 pages)
- Interpret S400 (40 pages)
- x6575 (2 pages)
- 27S2156-001 (2 pages)
- MENUS AND MESSAGES C522 (55 pages)
- Z25 (24 pages)
- Z35 (101 pages)
- series x5100 (77 pages)
- Z82 (105 pages)
- 2500 Series (76 pages)
- 1200 (208 pages)
- Z33 (114 pages)
- 7600 Series (181 pages)