Lexmark 302 User Manual

Page 43

Preparing to Load Forms

To prepare to load forms in the F1 forms device, follow these steps:

1. Slide the print head to the far left side of the printer.

2. Loosen the blue forms tension knob by turning it

counterclockwise, and then move the blue forms tension knob
towards the bottom of the printer until you see the

below the

number 1.

B l u e F o r m s

T e n s i o n K n o b

Note: Moving the blue forms tension knob to the

position

lets you load forms.

3. Unlock the blue locking lever on the

right tractor. Slide the

tractor to the extreme right.

B l u e L o c k i n g L e v e r