Lexmark 302 - Manual (Page 61)

4. When you release the key, the printer automatically saves the
current value.
Note: The ’s indicate the position of the print head relative to the
limits.
As long as you press Darker or Lighter, the printer displays an
increasing amount of darkness or lightness until one of the limits of
the gap is reached. The printer displays either
or
As you adjust the gap, you may also see the printer display
This message tells you that the forms thickness setting is at the
automatically set value.
See “Understanding the Operator Panel” in IBM 4232 Printer Model
302 Operator Panel Instructions for more information on this setting.
LIGHT | | DARK
DARKNESS LIMIT REACHED
LIGHT | ------------------| DARK
LIGHTNESS LIMIT REACHED
LIGHT | ---------| DARK
DEFAULT DARKNESS
Chapter 1. Setting Up the 4232 Printer Model 302 1-39