You can select the frame type for netware, Auto select, Ethernet ll – Lanier GX5050 User Manual
Page 76: Ethernet 802.2, Ethernet 802.3, Ethernet snap default: auto select, You can select the active protocol, Tcp/ip, Netware, Smb default: all active
73
Making Printer Settings
Frame Type (NW)
You can select the frame type for NetWare.
z
Auto Select
z
Ethernet ll
z
Ethernet 802.2
z
Ethernet 802.3
z
Ethernet SNAP
Default: Auto Select
Active Protocol
You can select the active protocol.
z
TCP/IP
z
NetWare
z
SMB
Default: All Active
Ethernet Speed
You can select the network speed to operate the printer.
z
Auto Select
z
10Mbps Half D.
z
10Mbps Full D.
z
100Mbps Half D.
z
100Mbps Full D.
Default: Auto Select
USB Setting
You can specify the settings related to communication when the computer and printer are connected via
USB. Usually, you do not need to change these settings.
USB Speed
z
Full Speed
z
Auto
Default: Auto
Port Setting
z
On
z
Off
Default: Off
z
To use NetBEUI, enable [SMB].
See also other documents in the category Lanier Printers:
- 6110 (3 pages)
- CP-282 (3 pages)
- 6213 (3 pages)
- 480-0332 (3 pages)
- 556 (3 pages)
- LP222cn (536 pages)
- PSW-6 (2 pages)
- AP2610 (182 pages)
- LD228C (3 pages)
- 5505 (368 pages)
- GX3050N (4 pages)
- MILO 60 (3 pages)
- 5645 (288 pages)
- 5355 (3 pages)
- 5455 (184 pages)
- 117-0154 (3 pages)
- LD020C (3 pages)
- MP CW2200/MP (220 pages)
- 480-0083 (3 pages)
- LDD030 (128 pages)
- AP206 (141 pages)
- 5515 (3 pages)
- FX-061 (2 pages)
- 5625 (180 pages)
- FX-071 (3 pages)
- M1D (2 pages)
- T 6055 (3 pages)
- MERIDIAN G SERIES G08 (3 pages)
- 5627 AG (118 pages)
- 5722 (3 pages)
- 5518 (97 pages)
- GX3050 (265 pages)
- RS232 (3 pages)
- DIGITAL COLOR PRINTER/COPIER 5722 (173 pages)
- 480-0209 (3 pages)
- 5811 (2 pages)
- LP 036c (3 pages)
- LD160C (3 pages)
- LF215 (196 pages)
- 5813 (264 pages)
- 117-0230 (2 pages)
- CP-458 (3 pages)
- 5613 (86 pages)
- DF-4 (2 pages)