Konica Minolta C250P - Manual (Page 322)

Loading copy paper 5
C250P 5-27
5.3 Specifying finishing settings
If the optional finisher is installed, the machine can be set to finish the pages
after printing them.
The Finishing settings can be specified from the printer driver.
Stapling prints (Staple settings)
!
Detail
In order for the prints to be stapled, all of the following conditions must
be met.
- The paper width must be between 7-1/4 inch and 11-3/4 inch.
- The paper length must be between 7-1/4 inch and 17 inch when finisher
FS-603 is installed or between 5-3/4 inch and 17 inch when finisher FS-
514.
Prints can be fed out stapled either in the corner or at two places.
2
Reminder
Pages can be fed out stapled together only if a finisher is installed.
When Finisher FS-603 is installed
Paper Weight Paper Size Loading Capacity (detected with ei-
ther measurement)
16 lb to 24 lb 8-1/2 × 11 w/v 1,000 sheets 6 inch
11 × 17 w, 8-1/2 × 14 w 500 sheets 3 inch
Number of Bound Pages Maximum Number of Sets
One place
towards the
back One place
towards the
front Two places
8-1/2 ×
11 w or
smaller 2 sheets 100 sets 40 sets 40 sets
3 to 5 sheets 80 sets 40 sets 40 sets
6 to 10 sheets 60 sets 40 sets 40 sets
11 to 20 sheets 30 sets 30 sets 30 sets
21 to 30 sheets 30 sets 30 sets 30 sets
31 to 50 sheets 30 sets/1,000
sheets 30 sets/1,000
sheets 30 sets/1,000
sheets