Konica Minolta C250P - Manual (Page 171)

Specifying printer driver settings 3
C250P 3-38
5
From the drop-down lists for the options, select the name of the option
that is installed.
2
Note
To automatically set the installed options, enter the printer name or IP ad-
dress of this machine in the “Printer Name or IP Address” box under “Op-
tion Information”, and then click the [Gather Option Information] button.
The [Gather Option Information] button can only be used when the SNMP
setting is enabled on this machine and the SNMP v1/v2c (IP) setting
check box is selected.
When the Mail Bin Kit is installed, you can assign output tray 1 and output
tray 2 as mail bins.
To assign the output destination of the mail bins, select “Bin Setting”
from “User Setting” — “Output Setting” on the control panel.
If “Printer” is displayed when specifying the output destination in the
printer driver, the mail bin that is selected is shown in the figure.