Konica Minolta C250P - Manual (Page 121)

Setting up the printer driver 2
C250P 2-58
5
In Administrator mode of PageScope Web Connection, select “Net-
Ware Setting” from the Network tab, and then specify the following set-
tings.
– IPX Setting: Select “ON”.
– Ethernet Frame Type: Select “Auto Detect”. (Select the frame type
according to the network environment.)
– NetWare Print Mode: Select “Nprinter/Rprinter”.
– Printer Name: Specify the printer name.
– Printer Number: Specify the printer number (0-255). When 255 is
specified, the setting is “Auto”.
6
Restart this machine (turn it off, then on again).
7
Use the NetWare server console to load PSERVER.NLM.
8
Use the NetWare server console to display the print server screen, and
then check that “C250P” (the created printer) is shown as “Waiting for
Job” for the connected printer (0).