Konica Minolta C250P - Manual (Page 176)

Specifying printer driver settings 3
C250P 3-43
2
Note
To enable any installed options, you must specify the Option settings. For
details, refer to “Specifying the Option tab settings” on page 3-62.
Setup tab
View When the [Paper View] button is clicked, a preview of the page
layout as specified in the current settings is displayed and a
preview image of the print job can be checked.
When the [Printer View] button is clicked, a printer figure is dis-
played showing any options, such as the paper tray, that are in-
stalled on this machine.
Item Function
Orientation Specifies the orientation of the image being printed on the paper.
Original Size Specifies the size of the original document.
Output Size Specifies the output paper size. Automatically enlarges or reduces
when the Original Size setting is changed.
Zoom Specifies the enlargement and reduction ratio.
Paper Source Selects the paper source for printing.
Paper Type Selects the paper type for printing.
Copies Specifies the number of copies to print.
Collate Specifies whether to print multiple copies in sets.
Offset When printing multiple copies, shifts the output position of each set.
Output Tray Selects the tray where the printed pages are fed to.
Output Method Specifies output methods, such as “Secured Print” and “Save in
User Box”.
User Authentication/
Account Track Specifies department names and passwords.
Button Function
Paper Printer