Konica Minolta C250P User Manual
Page 284
Control panel settings
4
C250P
4-41
I/F Setting
Time Adjustment
http Server
http Server Set
Select whether or not the http server
settings are used.
ON
PSWC Setting
Select whether or not PageScope
Web Connection is used.
ON
IPP
Specify IPP print settings.
—
IPP Setting
Select whether or not IPP printing is
used.
ON
IPP Auth.
Select whether or not authentication
is performed.
If IPP authentication is performed,
select the authentication method.
—
Accept IPP Job
Select whether or not IPP jobs are
permitted.
ON
Support Info.
Specify the print operations sup-
ported by IPP.
—
Printer Info.
Specify the printer information.
—
Disable
Proof
Select whether or not to permit a connection if the period of va-
lidity for the SSL sever certificate has expired when this ma-
chine is connecting to an SSL server as a client.
Permit
Network
Speed
Select the operating speed.
Auto
Parameters
Description
Initial Setting
Parameters
Description
Initial Setting
Parallel Timeout
Specify the length of time until a transmission
timeout occurs.
15 sec.
Network Timeout
Specify the length of time until a transmission
timeout occurs.
15 sec.
USB Timeout
Specify the length of time until a transmission
timeout occurs.
15 sec.
Parallel I/F
Specify the mode for using a parallel inter-
face.
ECP
IEEE 1284/USB
Select whether a parallel or USB interface is
used.
USB
Parameters
Description
Initial Setting
NTP Setting
Select whether or not the time is obtained
through NTP.
ON
NTP Server Add.
Specify the IP address or DNS name of the
NTP server.
—
Port No.
Specify the receiving port number for NTP.
123