Kodak 2400DSV - Manual (Page 84)

Function Mode and Adjustment 6
77
6 Function Mode and Adjustment
6.1 Precautions
1. Always unplug connectors by holding the connector housing.
Pulling on the cable cord can lead to problems with poor contact.
When unplugging connectors on the PWBs themselves, always make
sure the power is OFF first.
2. If it is necessary to plug in the power cord and operate the machine
after disassembling it, please be careful of the following.
● Keep your hands, clothing , etc. well away from operating or rotating
parts (such as gears and fan motors, etc.).
● Never touch the terminals of electrical parts or high-voltage parts
(such as power unit.).
3. See DISASSEMBLY AND CLEANING for the procedures to replace
parts and disassemble the machine.
4. Before starting the adjustment procedures, always make sure that the
power cord has been unplugged.
6.2 Overview
The function mode which performs setting and adjustment of the machine
is constituted as follows.
* mark in column of "setting" expresses an in default setting.
Display Function Mode Contents
S mode Machine Function Setting Mode 1
y mode Machine Function Setting Mode 2
o mode Machine Function Setting Mode 3
F mode Machine Operation Check Function 1
b mode Machine Operation Check Function 2