3 malfunction detection timing, 1 l2: projection lamp malfunction, 2 c1: scan unit drive malfunction – Kodak 2400DSV User Manual
Page 115: 3 c2: scan mirror drive malfunction
7
Troubleshooting
108
7.3
Malfunction Detection Timing
7.3.1
L2: Projection Lamp malfunction
7.3.2
C1: Scan Unit Drive malfunction
7.3.3
C2: Scan Mirror Drive malfunction
Display
Detection Timing
L2
When scan begins and the light of the Projection Lamp does not strike the CCD.
Display
Detection Timing
C1
The Scan Position Sensor (PC4) is not activated within 2sec. after the Scan
Table has started moving to the printer position.
The Reader Position Sensor (PC3) is not activated within 2sec. after the Scan
Table has started moving to the reader position.
Display
Detection Timing
C2
The Scan Motor (M1) is not deenergized within 16 sec. after it has been
energized during a scan motion.
The Scan Motor (M1) is not deenergized within 8 sec. after it has been
energized during a prescan motion.
Scan Table
Motor (M2)
Scan Position
Sensor (PC4)
ON
OFF
OFF
ON
within 2sec.
Scan Table
Motor (M2)
Reader Position
Sensor (PC3)
ON
OFF
OFF
ON
within 2sec.
Scan Motor
(M1)
ON
OFF
16 sec.
Scan Motor
(M1)
ON
OFF
8 sec.