KTI Networks KGS-2416 - Manual (Page 67)

63
Tag-based:
Tag-based VLAN identifies its member by VID. This is quite
different from port-based VLAN. If there are any more rules in
ingress filtering list or egress filtering list, the packet will be
screened with more filtering criteria to determine if it can be
forwarded. The switch supports supplement of 802.1q. For more
details, please see the section VLAN in Chapter 3.
Each tag-based VLAN you built up must be assigned VLAN name
and VLAN ID. Valid VLAN ID is 1-4094. User can create total up to
4094 Tag VLAN groups.
Segment A :
The “Segment A” mode is a special function for LAN Segmentation
(Converter Mode) application, it is working under VLAN function. When
the segment mode enabled, there are max. up to 12 LAN segments on the
switch and fixed two ports for each LAN segment and each LAN segment
will be isolated. The fixed segment ports mapping as below:
Segment Forwarding Port Mapping
1 Port 01 ÅÆ Port 09
2 Port 02 ÅÆ Port 10
3 Port 03 ÅÆ Port 11
4 Port 04 ÅÆ Port 12
5 Port 05 ÅÆ Port 13
6 Port 06 ÅÆ Port 14
7 Port 07 ÅÆ Port 15
8 Port 08 ÅÆ Port 16
9 Port 17 ÅÆ Port 18
10 Port 19 ÅÆ Port 20
11 Port 21 ÅÆ Port 22
12 Port 23 ÅÆ Port 24
Segment B :
The “Segment B” mode is a special function for LAN Segmentation
(Converter Mode) application, it is working under VLAN function. When
the segment mode enabled, there are max. up to 12 LAN segments on the
switch and fixed two ports for each LAN segment and each LAN segment
will be isolated. The fixed segment ports mapping as below:
Segment Forwarding Port Mapping
1 Port 01 ÅÆ Port 02
2 Port 03 ÅÆ Port 04
3 Port 05 ÅÆ Port 06
4 Port 07 ÅÆ Port 08
5 Port 09 ÅÆ Port 10
6 Port 11 ÅÆ Port 12
7 Port 13 ÅÆ Port 14
8 Port 15 ÅÆ Port 16
9 Port 17 ÅÆ Port 18
10 Port 19 ÅÆ Port 20
11 Port 21 ÅÆ Port 22
12 Port 23 ÅÆ Port 24