KTI Networks KGS-2416 - Manual (Page 219)

215
3-22 Maintenance
This chapter will introduce the reset and firmware upgrade function for the
firmware upgrade and key parameters change system maintenance requirements.
3-22-1 .Reset Device
Function name:
Reset Device
Function description:
We offer you many ways to reset the switch, including power up, hardware
reset and software reset. You can press the RESET button in the front panel
to reset the switch. After upgrading software, changing IP configuration or
changing VLAN mode configuration, then you must reboot to have the new
configuration taken effect. Here we are discussing is software reset for the
“reboot” in the main menu.
Fig. 3-174 Warm Reset
3-22-2 .Software Upload
Function name:
Software Upload
Function description:
Click on to select a specific SW24GF firmware file from the Web
management PC, then click on to confirm the upgrade firmware
action. The new firmware will be uploaded into the switch and write into flash
memory. You have to reboot the switch for new firmware take effect after the
firmware upgrade successfully.
Fig. 3-175 Firmware Update