KTI Networks KGS-2416 - Manual (Page 316)

312
Hardware Specifications
ƒ Standard Compliance: IEEE802.3/802.3ab / 802.3z / 802.3u / 802.3x
ƒ
Network Interface:
Configuration Mode Connector Port
10/100/1000Mbps Gigabit TP NWay TP (RJ-45) 1 - 8
1000Base-SX Gigabit Fiber 1000 FDX *SFP 1-24(Option)
1000Base-LX Gigabit Fiber 1000 FDX *SFP 1-24(Option)
1000Base-LX Single Fiber WDM (BiDi) 1000 FDX
*SFP
1-24(Option)
*Port 1, 8 are TP/SFP fiber dual media ports with auto detected function
*Optional SFP module supports LC or BiDi LC transceiver
ƒ
Transmission Mode: 10/100Mbps support full or half duplex
1000Mbps support full duplex only
ƒ
Transmission Speed: 10/100/1000Mbps for TP
1000Mbps for Fiber
ƒ
Full Forwarding/Filtering Packet Rate: PPS (packets per second)
Forwarding Rate Speed
1,488,000PPS 1000Mbps
148,800PPS 100Mbps
14,880PPS 10Mbps
ƒ
MAC Address and Self-learning: 8K MAC address
4K VLAN table entries,
ƒ Buffer Memory: Embedded 1392 KB frame buffer
ƒ
Flow Control: IEEE802.3x compliant for full duplex
Backpressure flow control for half duplex
ƒ Cable and Maximum Length:
TP Cat. 5 UTP cable, up to 100m
1000Base-SX
Up to 220/275/500/550m,
which depends on Multi-Mode Fiber type
1000Base-LX Single-Mode Fiber, up to10/30/50Km
1000Base-LX WDM (BiDi) Single-Mode Single Fiber, up to 20Km
ƒ
Diagnostic LED:
System LED : Power
Per Port LED:
10/100/1000M TP Port 1 to 8 : LINK/ACT, 10/100/1000Mbps
1000M SFP Fiber Port 1 to 24 : SFP(LINK/ACT)
ƒ Power Requirement : AC Line
Voltage : 100
∼240 V