KTI Networks KGS-2416 - Manual (Page 142)

138
SIP Address:
Default: 192.168.1.1
SIP Mask:
Default: 255.255.255.0
DIP Filter: (DIP Destination IP Address)
Range: Any / Host / Network
Any: Including all destination IP address
Host: Only one specific destination host IP address
Network: A specific IP subnet segment under the destination IP
mask
DIP Address:
Default: 192.168.1.254
DIP Mask:
Default: 255.255.255.0
VLAN Parameters:
VLAN ID Filter:
Range: Any / Specific
Any: Including all VLAN IDs
Specific: According to following VLAN ID and Tag Priority setting for
ingress classification
VLAN ID:
Range: 1-4094
Tag Priority:
Range: Any / 0-7
Any: Including all Tag Priority values
0-7: The Tag Priority Value is one of number (0-7)
Action Parameters:
When the ingress frame meets above ACL ingress classification rule you
can do the following actions:
Action:
Range: Permit / Deny
Permit:
Permit the met ACL ingress classification rule packets
forwarding to other ports on the switch
Deny:
Discard the met ACL ingress classification rule packets
Rate Limiter:
Range: Disabled / 1-16
Disable: Disable Rate Limiter function
1-16: Apply the Rate Limiter Number setting for met ACL ingress
rule packets