Options, System requirements for computer connection – KORG TRITON Extreme music workstation/sampler User Manual
Page 143
139
Program
Combination
Sequencer
Sampling
Song Play
Global
Ef
fect
Media, etc
Preset
Other
Appendices
Options
* Appearance and specifications of this product are subject to
change without notice. (January/’04)
System requirements for computer connection
Windows
Supported OS
When using USB Storage: Microsoft Windows 98/Me/2000 SP3 or
later/XP
* For Windows 98/Me, a USB driver for Windows 98 is required.
When using USB MIDI: Microsoft Windows XP
Supported computers
A computer with USB port that meets the requirements of the
above operating systems
Macintosh
Supported OS
When using USB storage: Mac OS 9.0.4 or later, Mac OS X 10.0
or later
When using USB MIDI: Mac OS X 10.2 or later
Supported computers
Apple Macintosh with USB port that meets the requirements of the
above operating systems
User interface
TouchView graphical user interface (320
×
240 pixel LCD display)
[VOLUME] slider
Mode keys
[COMBI], [PROG], [SEQ], [SAMPLING], [S.PLAY], [GLOBAL], [MEDIA]
Value controllers
[VALUE] slider, [VALUE] dial, [
][
] keys, numeric keys ([0]...[9], [–], [./10’s HOLD],
[ENTER])
[MENU] key, [EXIT] key, [COMPARE] key
BANK keys
[A], [B], [C], [D], [E], [F], [G], [H], [I], [J], [K], [L], [M], [N]
SEQUENCER keys
[PAUSE], [REW], [FF], [LOCATE], [REC/WRITE], [START/STOP]
SAMPLING keys
[REC], [START/STOP]
Audio outputs
AUDIO OUTPUT (MAIN) L/MONO, R
AUDIO OUTPUT (INDIVIDUAL) 1, 2, 3, 4
Output impedance
1.1 [k
Ω
] (L/MONO is 550 [
Ω
] for mono)
Maximum output level
+13.5 [dBu] or greater
Load impedance
100 [k
Ω
] or greater
AUDIO OUTPUT HEADPHONE
Output impedance
33 [
Ω
]
Maximum output level
22 [mW]
Load impedance
33 [
Ω
]
S/P DIF
Connector: optical, Format: 24-bit S/P DIF (IEC60958, EIAJ CP-
1201), Sample rate: 48 kHz
Audio inputs
AUDIO INPUT 1, 2
LEVEL [MIC/LINE] switch, [LEVEL] knob
Input impedance
10 [k
Ω
]
Nominal level
LINE:
+4 [dBu]
@ [LEVEL] knob= min.
–30 [dBu]
@ [LEVEL] knob= max.
MIC:
–17 [dBu]
@ [LEVEL] knob= min.
–52 [dBu]
@ [LEVEL] knob= max.
Maximum level
LINE:
+14 [dBu]
@ [LEVEL] knob= min.
–20 [dBu]
@ [LEVEL] knob= max.
MIC:
–7 [dBu]
@ [LEVEL] knob= min.
–43 [dBu]
@ [LEVEL] knob= max.
Source impedance
600 [
Ω
]
S/P DIF
Connector: optical, Format: 24-bit S/P DIF (IEC60958, EIAJ CP-
1201), Sample rate: 48 kHz
Control inputs
DAMPER (half-damper supported), ASSIGNABLE SWITCH/PEDAL
USB
USB A (to Device), USB B (to Host) connector:
Supports USB specification version 1.1
Support for Full speed (12 Mbps) and Low speed (1.5 Mbps)
USB Mass Storage Class specification compliance: Interface Class 8 (Mass Storage), Interface Subclass
2(SFF8020i), 5(SFF8070i), 6 (SCSI), Bulk transfer support: Interface Protocol [0x50h] (Bulk Only)
Other
MIDI IN, OUT, THRU, LCD contrast knob, CF card slot, AC power inlet, power switch, Calendar backup battery
Support for options
EXB-MOSS 72 pin SIMM memory slots
×
3 (for user sample memory)
Dimensions
(W
×
D
×
H)
88Keys: 1452
Ч
420
Ч
144 (mm) Inches: 57.17"
Ч
16.54"
Ч
5.67",
76Keys: 1316
Ч
360
Ч
117 (mm) Inches: 51.81"
Ч
14.17"
Ч
4.61",
61Keys: 1109
Ч
360
Ч
117 (mm) Inches: 43.66"
Ч
14.17"
Ч
4.61"
Weight
88 Keys: 28.5 kg/62.83lbs., 76 Keys: 16.9 kg/37.26lbs., 61 Keys: 14.4 kg/31.75lbs.
Power supply
AC Local Voltage
Power consumption
38 W
Included items
Power cable, CD-ROM (TNECD-D00)
Expansion boards
EXB-MOSS (DSP Synthesizer Board)
Expression/
volume pedal
XVP-10
Foot controller
EXP-2
Damper pedal
DS-1H
Pedal switch
PS-1
Other
MIDI cable