KORG TRITON Extreme music workstation/sampler - Manual (Page 116)

112
If “Placement” = Insert (Use 3/4 BUS):
If you want to send the external audio source to Valve
Force, set “BUS (IFX/Indiv.) Select” to 3/4(Tube),
3(Tube)
, or 4(Tube).
If you want to send the signal through an insert effect
and then into Valve Force, set “BUS(IFX/Indiv.)
Select
” to the insert effect, and set the post-IFX “BUS
Sel. ” (Insert FX page) to 3/4(Tube), 3(Tube), or 4(Tube).
The Valve Force output is assigned by “BUS Sel.”,
“Send1,” and “Send2” (Valve Force page).
Use “BUS Sel.” to send the signal to the L/R bus, insert
effect IFX1–IFX5 bus, or 1, 2 bus. “Send1” and “Send2”
adjust the send levels to the master effects.