Inserting a memory card, Setting focus, Inserting a memory card -3 setting focus -3 – Kodak DCS Pro 14n User Manual

Page 51

The Basics

April 29, 2004

4-3

3. Set the lens to its minimum aperture and lock.

Inserting a Memory Card

1. Open the Media door.

2. Insert a CF card in the top slot. (The label should be up.)

NOTE: In Advanced mode (see

) you can use either one or two

cards: a CF card in the top slot and either an SD or a MMC card in
the bottom slot.

3. Close the Media door.

Setting Focus

1. Set the Focus Mode selector to S (Single Servo AF).

Be sure the Focus Mode selector clicks into position.

NOTE: Do not rotate the lens focus ring while the Focus mode is set to S.

2. Set the Exposure Mode dial to AF Area mode.