Kodak DCS Pro 14n - Manual (Page 178)

11-12 April 29, 2004
Working with Images on the Camera
Tagging Images
You can tag one or more images for a variety of operations:
• On the camera, you can specify that the tagged images are not deleted.
• In the KODAK PROFESSIONAL DCS Photo Desk software, you can use
tags as a selection mechanism for a variety of operations.
• Printers adhering to the DPOF (Digital Print Order File) standard will
recognize and print images tagged for print. Your camera complies with
the DPOF standard for printing files from a memory card. DPOF
capability applies to JPEG images only. The option is disabled for RAW
images.
IMPORTANT: When you capture a JPEG, Raw, or Raw+JPEG image to
one or two cards, up to four copies of the image are
saved. If you tag the image, all copies are tagged.
1. If the Image LCD is off, press the OK button to turn it on in Image
mode.
If the Image LCD is on and a menu is displayed, press the Menu
button one or more times to change to Image mode.
2. Select an image.
3. Press and release the Tag/Record button (less than one second) to
display the Tag options.
A check mark (✓) appears next to options if the image has not been
tagged for those options. If the image has already been tagged for an
option, a slash appears through the check mark.
NOTE: If you hold the Tag/Record button for more than one second, you
access the Record option (see page 11-13 ).
4. Press the top or bottom of the Four-way switch to highlight the desired
option.
5. Release the Four-way switch to tag or uncut the image.
When an image is tagged, a check mark (✓) appears on the Status
bar when that image is selected. A check mark also appears in the
histogram for the image.