Kodak DCS Pro 14n - Manual (Page 209)

April 29, 2004 C-1
Appendix C: Troubleshooting
In addition to the issues described in this section, the following Web page
provides answers to many of your questions:
http://www.kodak.com/go/DCSPro14n .
Problems Indicated in the Top Status LCD
Top Status LCD Viewfinder Cause Remedy
fEE blinks fEE blinks Lens is not set to its minimum
aperture. Set lens to minimum aperture.
fEE blinks P blinks Attached Speedlight is not set at TTL
Auto Flash in P mode. Set the Speedlight flash mode to
TTL, or set the Exposure mode to S,
A, or M.
appears — Battery is low. Have fresh battery ready.
blinks — Battery needs to be charged. Remove the battery and charge it
— blinks Autofocus is not possible. Focus manually
HI appears HI appears Overexposure warning (subject is
too bright) In P mode, use an ND filter.
In S mode, select a faster shutter
speed.
In A mode, select a smaller
aperture (larger f-number).
(If the warning indications remain
after trying the remedy in S or A
mode, use an ND filter.)