Sun Microsystems Sun Fire V100 User Manual
Page 96
78
Sun Fire V100 Server User’s Guide • December 2001
●
To turn serial event reporting on again, type:
If you want to dedicate the Serial A/LOM port to the LOM device and you want to
use the Serial B port as your console port, see “To Dedicate Serial A/LOM to LOM”
on page 60.
▼
To Make the LOM Interface Backward
Compatible (
lom -B
)
If you have scripts written to the LOMlite interface on the Netra T1 Model 100/105
server or the Netra t 1400/1405 server and you want to use these scripts on the Sun
Fire V100 server, you can add file system links that make this possible.
●
Type:
When you have done this, you will be able to use the old scripts on the new system.
▼
To Upgrade LOM Firmware
(
lom -G default
)
To upgrade the firmware for LOM, obtain the new firmware package from the
SunSolve
SM
website (
http://sunsolve.sun.com
) or from your local Sun sales
representative, and type the following:
Note –
LOM firmware upgrades are released as patches and include detailed
installation instructions.
# lom -E on
# lom -B
# lom -G default