Configuring automatic server restart – Sun Microsystems Sun Fire V100 User Manual
Page 91

Chapter 6
Managing the Sun Fire V100 Server From the Solaris Prompt
73
FIGURE 6-1
Sample LOM Device Event Log (Oldest Event Reported First)
Configuring Automatic Server Restart
You can configure automatic server restart (ASR) to restart a server automatically
after a lockup. LOM has a watchdog process that, by default, expects to be patted
every 10,000 milliseconds. If it does not receive a pat after 40,000 milliseconds
(default), then LOM switches on the front and back fault LEDs and generates a LOM
event report. However, it does not automatically restart the system unless you have
configured it to do so.
▼
To Configure the LOM ASR
●
Add the
-R
option to the
priocntl
command in the script file called
/etc/
rc2.d/S25lom
.
This is the script that runs the LOM watchdog process:
When you have done this, LOM will restart the server whenever the watchdog times
out.
# lom -e 10
LOMlite Event Log:
+0h0m21s host reset
9/15/2000 17:35:28 GMT LOM time reference
+0h3m20s fault led state - ON
+0h3m24s fault led state - OFF
+0h39m34s Alarm 1 ON
+0h39m40s Alarm 3 ON
+0h39m54s Alarm 3 OFF
+0h40m0s Alarm 1 OFF
+0h48m52s fault led state - OFF
+0h49m39s Fan 1 FATAL FAULT: failed
+0h50m58s fault led state - ON
# lom -e 10
# priocntl -e -c RT lom -W on,40000,10000 -R on