beautypg.com

Sun Microsystems Sun Fire V100 User Manual

Page 108

background image

90

Sun Fire V100 Server User’s Guide • December 2001

3. Slide the top cover back until the arrow on the cover lines up with the arrow on

the server body.

4. Lift the cover up and off.

▼

To Replace the Top Cover

1. Align the arrow on the cover with the arrow on the server body.

2. Press the cover down so that it clips into the server body.

FIGURE 8-4

Replacing the Top Cover

3. Slide the cover forwards so that its leading edge is flush with the back of the

server’s front bezel.

Note –

When the cover is in position, the arrows do not line up; the arrow on the

cover is further towards the bezel than the arrow on the server body.

See also other documents in the category Sun Microsystems Computers: