Sun Microsystems Sun Fire V100 User Manual

Page 77

Chapter 5

Managing the Sun Fire V100 Server From the

lom>

Prompt

●

Turn the alarm off by typing:

where n is the number of the alarm you want to turn off: 1, 2, or 3.

Alarms 1, 2, and 3 are software flags. They are not associated with any specific
conditions, but are available to be set by your own processes or from the command
line. For more information, see “To Turn the Alarms On and Off (lom -A)” on
page 76.

▼

To Stop LOM Sending Event Reports to the
Serial A/LOM Port

●

Enable event reporting by typing:

Note –

This is the equivalent of using the

lom -E on

command from the Solaris

shell. For more information, see “To View the Event Log (lom -e)” on page 72.

●

Disable event reporting by typing:

Note –

This is the equivalent of using the

lom -E off

command from the Solaris

shell. For more details, see “To Stop LOM From Sending Reports to the Serial A/
LOM Port (lom -E off)” on page 77.

lom> alarmoff

lom> event-reporting on

lom> event-reporting off