Sun Microsystems 5602 - Manual (Page 60)

3 – Managing Fabrics
Securing a Fabric
3-14 59097-01 A
0
3.2.4.5
Create Security Group Member Dialog
Use the Create Security Group Member dialog, shown in Figure 3-7 , to add a
member to a security group. Choose options from the Group Member (or
manually type in a hex value) and Authentication pull-down menus, and enter
values in the Secret and Binding (ISL groups only) fields.
Figure 3-7. Create a Security Group Member Dialog
The conventions for ISL security group members are listed below:
„ You can enter member world-wide name (WWN), which must be 16 hex
characters, or 23 characters with valid WWN format xx:xx:xx:xx:xx:xx:xx:xx.
„ The authentication choices are None and Chap.
„ The Secret field is disabled if authentication is set to None. If authentication
is Chap, the Secret field is enabled.
„ The Generate button is only enabled when authentication is set to Chap.
„ Valid binding entries are between 0 to 239.
The conventions for Port security group members are listed below:
„ You can enter member world-wide name (WWN), which must be 16 hex
characters, or 23 characters with valid WWN format xx:xx:xx:xx:xx:xx:xx:xx.
„ The authentication choices are None and Chap.
„ The Secret field is disabled if authentication is set to None. If authentication
is Chap, the Secret field is enabled.
„ The Generate button is only enabled when authentication is set to Chap.