Hardreset command, A-33 – Sun Microsystems 5602 User Manual
Page 207
A – Command Line Interface
Hardreset Command
59097-01 A
A-33
0
Hardreset Command
Resets the switch and performs a power-on self test. This reset disrupts traffic,
activates the pending firmware, and clears the alarm log. To save the alarm log
before resetting, refer to the
”Set Log Command” on page A-75
.
Authority
Admin session
Syntax
hardreset
Notes
To reset the switch without a power-on self test, refer to the
To reset the switch without disrupting traffic, refer to the