Sun Microsystems 5602 - Manual (Page 308)

A – Command Line Interface
Zoning Command
A-134 59097-01 A
0
history
Displays a history of zoning modifications. This keyword does not require an
Admin session. History information includes the following:
„
Time of the most recent zone set activation or deactivation and the user who
performed it
„ Time of the most recent modifications to the zoning database and the user
who made them.
„ Checksum for the zoning database
limits
Displays the number of zone sets, zones, aliases, members per zone, members
per alias, and total members in the zoning database. This keyword also displays
the switch zoning database limits, excluding the active zone set, which are
described in
Table A-29 . This keyword does not require an Admin session.
list
Lists all zoning definitions. This keyword does not require an Admin session.
restore
Reverts the changes to the zoning database that have been made during the
current Zoning Edit session since the last Zoning Save command was entered.
save
Saves changes made during the current Zoning Edit session. The system informs
you that the zone set must be activated to implement any changes. This does not
apply if you entered the Zoning Clear command during the Zoning Edit session.
Table A-29. Zoning Database Limits
Limit Description
MaxZoneSets Maximum number of zone sets (256)
MaxZones Maximum number of zones (2000)
MaxAliases Maximum number of aliases (2500)
MaxTotalMembers Maximum number of zone and alias members (10000)
that can be stored in the switch’s zoning database.
MaxZonesInZoneSets Maximum number of zones that are components of zone
sets (2000), excluding those in the orphan zone set, that
can be stored in the switch’s zoning database. Each
instance of a zone in a zone set counts toward this
maximum.
MaxMembersPerZone Maximum number of members in a zone (2000)
MaxMembersPerAlias Maximum number of members in an alias (2000)