7 snmp properties, Snmp properties -30, Snmp properties dialog -30 – Sun Microsystems 5602 User Manual

Page 134

Text mode
Original mode

4 – Managing Switches
Configuring a Switch

4-30

59097-01 A

4.7.7

SNMP Properties

Use the SNMP Properties dialog shown in

Figure 4-13

to change SNMP

configuration parameters. After making changes, click the OK button to put the
new values into effect. To open the SNMP Properties dialog, select a switch in the
topology display or open the faceplate display, open the Switch menu and select
SNMP Properties.

Figure 4-13. SNMP Properties Dialog

Note:

Since Read Community, Trap Community, and Write Community
settings are like passwords and are write-only fields, the current
settings are displayed as asterisks.