Sun Microsystems 5602 - Manual (Page 175)

59097-01 A A-1
Appendix A
Command Line Interface
„ Logging On to a Switch
„ User Accounts
„ Working with Switch Configurations
„ Commands
A.1
Logging On to a Switch
To log on to a switch using Telnet, open a command line window on the
workstation and enter the Telnet command followed by the switch IP address:
# telnet ip_address
A Telnet window opens prompting you for a login. Enter an account name and
password.
To log on to a switch through the serial port, configure the workstation port with the
following settings:
„ 9600 baud
„ 8-bit character
„ 1 stop bit
„ No parity
Enter an account name and password when prompted.