Siemens SICLOCK TC 400 - Manual (Page 93)

Parameter Table
10-91 © Siemens AG 2007 All Rights Reserved
SICLOCK
® TC 400
Network Settings/Ethernet 4
0.05.04
IP Adapter 4 IP address Min:
Max:
Default: 0.0.0.0
255.255.255.255
192.168.4.40
subnet mask Min:
Max:
Default: 0.0.0.0
255.255.255.255
255.255.255.0
gateway Min:
Max:
Default: 0.0.0.0
255.255.255.255
0.0.0.0
0.05.08
Network Adapter 4 hardware address Min:
Max:
Default: 00.00.00.00.00.00
FF.FF.FF.FF.FF.FF
00.00.00.00.00.00
0.09.16
Line State Adapter 4 link Min:
Max:
Default: ---
down
---
linespeed Min:
Max:
Default: ---
100 Mb/s
---
duplex Min:
Max:
Default: ---
half duplex
---
0.05.12
Advanced Settings
Adapter 4 monitor link state Min:
Max:
Default: off
alarm
off
SIMATIC Method
0.15.01
Ethernet 1 mode Min:
Max:
Default: off
S5-compat., every 10 s
off
send condition Min:
Max:
Default: ---
only if synchronized
---
destination address Min:
Max:
Default: 00.00.00.00.00.00
FF.FF.FF.FF.FF.FF
FF.FF.FF.FF.FF.FF
Table 10-1 List of the parameters of SICLOCK TC 400
Access 1)
/ No.
Parameter Entry Value Range / Default