2 permitted mounting position, 3 fixing method, Permitted mounting position – Siemens SICLOCK TC 400 User Manual
Page 32: Fixing method
Operation Planning
4-30
© Siemens AG 2007 All Rights Reserved
SICLOCK
®
TC 400
4.4.2
Permitted mounting position
The only permissible mounting position is horizontal, i.e. the display is read hori-
zontally. Adequate ventilation cannot be guaranteed in other mounting positions
Figure 4-1 Horizontal mounting position
4.4.3
Fixing method
The housing can be snapped onto DIN rails or fixed to SIMATIC S5 standard
mounting rails.
See also Installation overview (Section 5.1).