Siemens SICLOCK TC 400 User Manual

Page 61

Configuration Tool

7-59

TC 400

7.3.4

Reading parameters / writing parameters / resetting
parameters to factory settings

In online mode, you can individually read, write and reset parameters to their fac-
tory settings.

To initiate the "Read parameter", "Write parameter" or "Reset parameter to
factory setting" function:

1. Make sure that the configuration tool is connected to the device. See Estab-

2. Select the desired parameter/entry in the parameter tree or parameter table.

3. Right-click the parameter or entry.

−> The context menu opens.

Left-click the desired function.

Figure 7-7 Context menu to read, write or reset parameter