1 establish/disconnect online connection, Establish/disconnect online connection – Siemens SICLOCK TC 400 User Manual

Page 53

Configuration Tool

7-51

TC 400

7.2.1

Establish/disconnect online connection

To establish an online connection to the SICLOCK TC 400:

1. Enter the IP address of the device in the toolbar.

2. Start the connection build-up by clicking the

icon next to the IP address

field.

−> The configuration tool changes to online mode:

To disconnect the online connection to the SICLOCK TC 400:

1. Click the

icon next to the IP address field.

−> The configuration tool changes to offline mode:

Acknowledge all events

Acknowledge all pending events
In online mode, an acknowledgement for all pending events is sent to the
device. There is an acknowledgement even when the cause of the event is
still present. In this way it is possible, for example, to clear persistent
alarms.

Ignore event

Discard the pending event
The event display is cleared without interaction with the device.

Table 7-2

Operator options and displays in the toolbar of the configuration tool

Field/Button

Meaning/Instruction

Note

The device is disconnected if there have not been any operator actions for approx.
two hours