Siemens SICLOCK TC 400 User Manual

Page 17

Text mode
Original mode

Description

2-15

TC 400

2.3.2

Plant synchronization via point-to-point connection

Non-networked plant equipment is synchronized via OUTPUTs 1 to 3 (point-to-
point connections). They can be parameterized independently.

OUTPUTs 1 and 2

• Current signal: 20 mA active, floating

• Voltage signal: 24 V, floating

OUTPUT 3

RS422, floating

Output signal

• DCF77 with local time, invertible
• DCF77 with UTC, invertible
• Pulse per second, invertible
• Pulse per minute, invertible
• Serial telegram (parameterizable output telegram, see below)

Output telegram (setting applies to all three outputs)

• Meinberg compatible (including time zones)
• Meinberg compatible (not including time zones)
• NMEA (0183/ZDA)