Siemens SICLOCK TC 400 - Manual (Page 106)

Messages
12-104 © Siemens AG 2007 All Rights Reserved
SICLOCK ® TC 400
Density of synchronization
Information Specifies the number of input synchronizations per interval.
The message is output cyclically and is used to judge the reception quality.
Synchronization status
Information The message is output cyclically (e.g. every 12 hours) in order to document the current
external synchronization in the archive.
Status of synchronization (changeover)
Information The synchronization status has changed.
System start
System The system has been started. The message is triggered when the system starts.
TFTP file requested
Information A TFTP file has been requested.
(E.g. firmware update, Web data update, etc.)
TFTP file received
Information A file has been loaded via TFTP.
(E.g. firmware update, Web data update, etc.)
TFTP file transferred
Information A file has been transferred from the device via TFTP.
(E.g. firmware update, Web data update, etc.)
Time initialized by hardware
Application An initial synchronization of the clock module has been performed.
Time set by HMI
Application Time domain(s) has(have) been changed via HMI
Table 12-1 Message overview with event type and brief description