Siemens SICLOCK TC 400 - Manual (Page 65)

Configuration Tool
7-63 © Siemens AG 2007 All Rights Reserved
SICLOCK
® TC 400
7.4.2 Filter
You can specifically show and hide events via a filter to facilitate searching in the
archive. All events listed in the include window are displayed in the archive table,
all events listed in the exclude window are not displayed.
Changing the assignment of an event in the filter from include to exclude
(or vice versa):
1. Click the event in the include window (or exclude window).
−> The event is highlighted in blue.
2. Click .
−> The event is transferred from the include to the exclude filter (or vice versa).
To select and exchange several events in the filters:
1. Press the CTRL while you are selecting the events in the filter per mouse click.
−> The event is highlighted in blue and the already selected events also
remain highlighted in blue.
2. Click .
−> The event is transferred from the include to the exclude filter (or vice versa).
To select and exchange several successive events in the filters:
1. Click the first element of the event group.
2. Click the last element of the event group while simultaneously pressing the
SHIFT key.
−> The two events and all the events in between are selected.
3. Click .
−> The event is transferred from the include to the exclude filter (or vice versa).
To remove all events from the include or exclude filter:
1. Click the button above the include or exclude filter.
−> The include or exclude filter is cleared. The cleared events are now in the
opposite filter for selection.