Siemens SICLOCK TC 400 - Manual (Page 92)

Parameter Table
10-90 © Siemens AG 2007 All Rights Reserved
SICLOCK ® TC 400
0.05.06
Network Adapter 2 hardware address Min:
Max:
Default: 00.00.00.00.00.00
FF.FF.FF.FF.FF.FF
00.00.00.00.00.00
0.09.14
Line State Adapter 2 link Min:
Max:
Default: ---
down
---
linespeed Min:
Max:
Default: ---
100 Mb/s
---
duplex Min:
Max:
Default: ---
half duplex
---
0.05.10
Advanced Settings
Adapter 2 monitor link state Min:
Max:
Default: off
alarm
off
Network Settings/Ethernet 3
0.05.03
IP Adapter 3 IP address Min:
Max:
Default: 0.0.0.0
255.255.255.255
192.168.3.30
subnet mask Min:
Max:
Default: 0.0.0.0
255.255.255.255
255.255.255.0
gateway Min:
Max:
Default: 0.0.0.0
255.255.255.255
0.0.0.0
0.05.07
Network Adapter 3 hardware address Min:
Max:
Default: 00.00.00.00.00.00
FF.FF.FF.FF.FF.FF
00.00.00.00.00.00
0.09.15
Line State Adapter 3 link Min:
Max:
Default: ---
down
---
linespeed Min:
Max:
Default: ---
100 Mb/s
---
duplex Min:
Max:
Default: ---
half duplex
---
0.05.11
Advanced Settings
Adapter 3 monitor link state Min:
Max:
Default: off
alarm
off
Table 10-1 List of the parameters of SICLOCK TC 400
Access 1)
/ No.
Parameter Entry Value Range / Default