Sun Microsystems Sun Fire X4150 Server - Manual (Page 56)

46 Sun Fire X4150 Installation Guide • January 2008
Installation Information Description Enter System Configuration:
Asterisk (*) indicates default.
NIS+
and NIS Do you want to specify a name server or let the
installation program find one? Specify One
Find One*
DNS Provide IP addresses for the DNS server. You
must enter at least one IP address, but you can
enter up to three addresses.
You can also enter a list of domains to search
when a DNS query is made.
IP addresses (1–3):
Search Domains (1–3):
LDAP Provide the following information about your
LDAP profile:
If you specify a proxy credential level in your
LDAP profile, gather the following information:
Proxy-Bind Distinguished Name:
Proxy-Bind Password: Profile name:
Profile server:
Default route Do you want to specify a default route IP address
or let the Solaris installation program find one?
The default route provides a bridge that forwards
traffic between two physical networks. An IP
address is a unique number that identifies each
host on a network. Specify IP address
Detect IP address
None*
Select one of the following routes:
• Specify IP address. An /etc/defaultrouter file is created with the
specified IP address. When the system is rebooted, the specified IP address
becomes the default route.
• Detect IP address. Let the Solaris installation program detect an IP address.
However, the system must be on a subnet that has a router that advertises
itself by using the ICMP router discovery protocol. If you are using the
command-line interface, the software detects an IP address when the system
is booted.
• None. Select None if you do not have a router or do not want the software to
detect an IP address at this time. The software automatically tries to detect an
IP address on reboot.
Time zone How do you want to specify your default time
zone? Geographic region*
Offset from GM
Time zone file
Root password Choose a root password for the system.