Sun Microsystems Sun Fire X4150 Server - Manual (Page 29)

Chapter 2 Installing the Sun Fire X4150 Server Into a Rack with Slide-Rails 19
Caution – Always load equipment into a rack from the bottom up so that it will not
become top-heavy and tip over. Extend your rack’s anti-tip foot to prevent the rack
from tipping during equipment installation.
1. Push the slide-rails into the slide-rail assemblies in the rack as far as possible.
2. Raise the server so that the rear ends of the mounting-brackets are aligned with
the slide-rail assemblies that are mounted in the equipment rack. (See FIGURE 2-6 .)