Sun Microsystems Sun Fire X4150 Server - Manual (Page 22)

12 Sun Fire X4150 Installation Guide • January 2008
Disassembling Slide-Rails
Do one of the following procedures before installation:
■ “Disassembling Bolt-On Slide-Rails” on page 12
■ “Disassembling Tool-less Slide-Rails” on page 13
Disassembling Bolt-On Slide-Rails
To remove the mounting-brackets from the bolt-on slide-rail assemblies:
1. Unpack the slide-rails.
2. Locate the slide-rail lock at the front of one of the slide-rail assemblies, as shown
in FIGURE 2-1 .
3. Squeeze and hold the tabs at the top and bottom of the lock while you pull the
mounting-bracket out of the slide-rail assembly until it reaches the stop. (See
FIGURE 2-1 ).
4. Push the mounting-bracket release button toward the front of the mounting-
bracket, as shown in FIGURE 2-1 , and simultaneously withdraw the mounting-
bracket from the slide-rail assembly.